Preferred™ Series Puron Advance™ Single-Packaged Rooftop Units with Axion™ Technology and Gas Heating/Electric Cooling
- Puron Advance (R-454B) refrigerant meets and exceeds EPA’s new Low GWP requirements
- New – UL 60335-2-40 Certified A2L leak detection and dissipation system factory installed standard
- Direct Drive Axion™ Technology indoor fan system uses Vane Axial fan design & electronically commutated motor
- Two-stage cooling capacity control on all models
- New Unit Control Board with intuitive quick fan speed adjustment
- SEER2 up to 16.8, IEER up to 17.5
- Gas efficiencies up to 81%
- Cooling operating range up to 125 °F (52°C) and down to 40°F (4°C) using winter start kit
- Innovative corrosive-resistant composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Exclusive IGC solid-state control for on-board diagnostics with LED error code designation and burner control logic
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
- Units meet ASHRAE 90.1 energy efficiency levels.
MAINTENANCE FEATURES
- New unit control board facilitating simple safety circuit troubleshooting and simplified control box arrangement as well as easy intuitive fan speed adjustment
- Access panels with easy grip handles
- Innovative, easy starting, no-strip screw feature on unit access panels
- Tool-less filter access door
- Optional hinged access panels also available
- NEW Direct Drive – Axion™ Technology Indoor fan system uses Vane Axial fan design and electronically commutated motor with beltless design
- Two-inch disposable return air filters
RELIABILITY
- Leak detection and dissipation system standard
- Scroll compressors with internal line-break overload protection
- 24-volt control circuit protected with resettable circuit breaker
- Permanently lubricated direct-drive ECM evaporator-fan motor
- Totally enclosed condenser motors with permanently lubricated bearings
- Low pressure and high-pressure switch protection
- Exclusive IGC anti-cycle protection for gas heat operation
- Solid-state electronic direct spark ignition system and flame roll-out safety protector
PERFORMANCE
Efficiency Up to 16.8 SEER2 / Up to 17.5 IEER/
INSTALLATION
- Same footprint as prior Bryant models for that original fit; reduces installation costs and time
- Field convertible from vertical to horizontal airflow configuration on units up to 15 tons
- Provisions for thru-the-bottom power entry capability as standard
- Single point gas, electric, and controls connections
- Full perimeter base rail with built-in rigging adapters and fork truck slots
WARRANTY
- 10 years parts only heat exchanger - aluminized
- 15 years parts only heat exchanger - stainless steel
- 10 years parts only heat exchanger – Ultra/Low NOx models
- 5 years parts only compressor
- One-year parts only on all other parts
- Additional extended warranty packages available
Factory-Installed Options and Accessories
- Temperature Sensing Economizer with relief
- Enthalpy Sensing Economizer with relief
- Perfect Humidity™ Adaptive Dehumidification System
- Multiple Gas Heat Sizes
- Stainless Steel Gas Heat Exchangers
- Return Air Smoke Detector
- Supply Air Smoke Detector
- CO2 Sensor
- Condensate Overflow Protection
- Multiple Static Fan Capabilities
- Phase Monitor/Protection
- Thru-The-Base Utility Connections
- Louvered Hail Guards
- Non-Fused Disconnect Switch
- 2” MERV-13 Filters
- Low Ambient Controls
- Hinged Access Panels
- Unpowered Convenience Outlet
- Powered Convenience Outlet
- Coated Coils: Pre-Coat, E-Coat or Copper/Copper
- Electrical Mechanical Controls
- Extended Warranty Protection Plans